Guidance Notes
Step 1
Specifiy either the internal or external diameter of the enclosure required depending
upon which is the more critical dimension for your application. The wall thickness will depend upon the size of the enclosure. The maximum height will be approximately half the diameter. Please also state the units for the dimension you enter.
Step 2
Specify the opening and closing method required. This can be either manual or
automatic.
Step 3
Select a colour for the enclosure from our standard range. If you require a different
colour or have a colour scheme in mind then please provide details of this in the
additional requirements section. If you have a requirement for artwork to be applied to the enclosure then details of this can also be submitted in the additional requirements section. Please note that non-standard colours may be subject to a minimum order quantity.
Step 4
Specifiy the anchoring system you require. This will depend upon the type of surface on which the enclosure will be erected. Choose spiral anchors for soft ground such as grass/chemical anchors for hard surfaces such as concrete that can be drilled/or ballast tanks for surfaces that cannot be drilled.
Step 5
Specify any additional requirements. These could include requirements for flooring/
lighting/heating/air conditioning etc. This section can also be used to provide details
of special colours or artwork. Please feel free to attach documents containing
specifications or artwork. If multiple enclosures are required then please state the
quantity in this section.
Step 6
Provide your contact details.
|
